Video Input
- Digital format with up to 10-bit precision
- Input resolution : Full HD Support
- Interlaced video up to 1920x1080i(1920x1152i)
- Progressive video up to 1920x1080p(1920x1152p)
- Video format : Sub-sampling type : RGB/YCbCr 4:4:4 or YCbCr 4:2:2
- Y/C type : Multiplexed(BT.656) or separated(BT.601)
- Sync type : Separated or embedded(BT.1120 or BT.656)
- Digital input : 24-bit(4:4:4) or 8/10/16/20/24-bit(4:2:2)
Video Output
- Analog format with triple 10-bit DACs HDMI(ver. 1.3)/DVI
- Output resolution : Full HD support
- Interlaced video up to 1920x1080i(1920x1152i)
- Progressive video up to 1920x1080p(1920x1152p)
- Video format : Sub-sampling type : RGB/YCbCr 4:4:4 or YCbCr 4:2:2
- Y/C type : Multiplexed(BT.656) or separated(BT.601)
- Sync type : Separated or embedded(BT.1120 or BT.656)
- Analog video output with triple 10-bit DACs(separate sync or sync on G/Y)
Deinterlacing
- Motion adaptive 3-D deinterlacing on a per-pixel basis
- Advanced multi-directional edge preserving
- Various speed motion and still image detection
- Motion boundary preserving
- Film mode support for 3:2 and 2:2 pull-down
- Bad-edit/subtitle detection and adaptation
Noise Reduction and Cross Color Suppression
- MPEG noise(block noise and mosquito noise) reduction
- Cross-color suppression for 2-D comb-filtered input(CCS)
- Automatic chroma upsampling error(CUE) detection and correction
Format Conversion
- Independent horizontal and vertical scaling with anti-aliasing interpolation filter
- 8(H)x4(V) taps for luma, 4(H)x4(V) taps for chroma
- Format conversion from one format to another format with an arbitrary scaling ratio
- Scaling ratio : x1/15 ~ unlimited
- Non-uniform scaling for panorama mode
- Programmable size & position zoom in/out
Display Functions
- CSC for brightness, contrast, hue, saturation
- Programmable output sync generation
- Lock-to-input sync mode or free-run mode
- Video overlay on background video
Frame Rate Conversion
- Frame rate conversion from 3-250Hz to 3-250Hz
- Conversion ratio : x1/31 ~ x31
- Uses double frame buffer
Video Enhancement
- High order programmable horizontal peaking filter
- Filter for color component enhancement
- LTI and CTI for edge enhancement
- Independent color control(ICC)
- Dynamic contrast enhancement(DCE)
OSD
- Four Layers : Two Layers with 4 Sprites Per Layer
One Cursor and One Background Layer
- Up to 256-color Palette Mode Bitmap
- 16, 24 or 32-bit Full Color Mode Bitmap
- Sprite, palette or pixel based alpha blending
- Up to 32x63 font size and 1-bpp or 4-bpp font color
- 32-row x 16-col or 16-row x 32-col character map
- Bitmap fill, copy and run-length decoding
HDMI/DVI Transmitter
- Industrial standard compliant HDMI 1.3, DVI 1.0, EIA/CEA-861D and HDCP 1.2
- Deep color(36-bit) and xvYCC support
- I²C master interface for DDC connection
- Integrated HDCP cipher engine and pre-programmed HDCP keys
- Hot plug detection for monitor/TV interface
- Four I²S audio inputs : 2Ch. 192kHz or 8Ch. 96kHz
- Audio up-sampling for HDMI standard
- Industrial audio standard support : IEC60958 for PCM and IEC61937 compressed audio(Dolby Digital, DTS and etc.)
- Adjustable audio delay for A/V synchronization(up to 680ms at 48kHz)
- Built in consumer electronics control(CEC) support
Frame Buffer Memory
- Embedded frame buffer memory
Communication Interface
- 2-wire serial interface-I²C
Miscellaneous
- Auto detection of input video/sync
- Internal programmable PLLs
- Genlock to background video sync
- Built-in test pattern generation logic
- PWM control for flat panel display
Electrical and Mechanical Characteristics
- 1.2, 1.8V & 3.3V supply voltage
- Low power consumption
- 144-pin FBGA package(12mm x 12mm/0.8mm pitch)
- Pin-compatible with MDIN-240/241