 |
| |
| MDM-300T is the fastest, lowest cost and verified solution for Australian TV development. |
|
 |
MDM-300T is Digital TV Tuner Module for display devices such as LCD, PDP or CRT |
| |
TV. |
|
 |
MDM-300T receives DVB-T programs. |
|
 |
MDM-300T supports YPbPr or RGB video signal output as well as CVBS, S-Video |
| |
output. |
|
 |
MDM-300T supports L / R audio output and Dolby Digital output via SPDIF. |
|
|
|
| |
|
 |
| |
 |
Receives digital TV (DVB-T) |
|
 |
IMPEG-2 MP@HL (HDTV), MPEG-2 MP@ML (SDTV) decoding |
|
 |
YPbPr / RGBHV output for HD display, simultaneous CVBS, S-Video |
|
 |
Supports 1920 x 1080i, 1280 x 720p, 720 x 576p, 720 x 576i video out format |
|
 |
Supports analog L / R audio and SPDIF output |
|
 |
Supports EPG for digital channels |
|
| |
|
 |
| |
| Section |
Item |
Specifications |
Antenna Input |
Receiving Frequency |
170MHz to 230MHz (center freq.)
470MHz to 862MHz (center freq.) |
Transmission System |
DVB-T / OFDM (No analog TV input) |
Channel Bandwidth |
7MHz |
Antenna Impedance |
75 Ohms |
RF Connector |
IEC connector Female (PAL type) |
Loop Through Output |
IEC connector Male (PAL type) |
| Audio |
Algorithm |
MPEG-1 Layer I & II, MPEG-2 Layer II, Dolby Digital |
| Frequency Response |
20Hz to 20kHz |
| Sampling Rate |
32kHz, 44.1kHz, 48kHz |
| Antenna Impedance |
75 Ohms |
| Fixed Audio Output |
Stereo (RCA connector) |
| Digital Audio Output |
SPDIF Output |
| Control Interface |
RS-232C Serial Port |
Command Control Intreface,
Service or Software Upgrade |
| Reset Signal Input |
Power On with Reset Low ¢¡ 150ms ¢¡ Reset High |
| Video |
Algorithm |
MPEG-2 MP@HL (HDTV),
MPEG-2 MP@ML (SDTV) |
| Decoding Format |
All Australian Digital TV Standard Formats |
| Display Aspect Ratio |
16:9 and 4:3 |
| Display Frame Rate |
50 Fields / sec |
| HD Video Output Format |
YPbPr or RGB / HV (RCA and VGA connector), and HDMI
1920 x 1080i, 1280 x 720p, 720 x 576p |
| SD Video Output Format |
720 x 576i |
| Features |
Main Chipset |
Zoran Generation 9 Elite |
| GUI |
Easy-to-use GUI |
| S / W Upgrade |
RS-232C Serial Port |
| EPG |
Now - and - Next Format |
| Teletext & CC |
Support |
| Power Requirement |
Supply Voltage |
+3.3V (Typ : 0.12A),
+5V (Typ : 0.93A), +5V_Tuner (Typ : 0.19A) |
|
|