 |
| |
 |
MDM-410 is digital TV terrestrial receiver module that is fully compliant with ATSC |
| |
digital television standard. |
|
|
|
MDM-410 decodes all 18 ATSC DTV standard video formats, and supports EPG |
|
(Electronic Program Guide) and Closed Caption functions. |
|
|
|
With the MDM-410, you can view HDTV, SDTV, and listen to DTV broadcasts with |
|
exciting Dolby Digital sound. |
|
|
|
MDM-410 provides component video, S-video and composite video output. |
|
|
|
Analog stereo audio (R/L) and Dolby Digital(SPDIF) audio outputs
are supported. |
|
|
|
Various target systems can control MDM-410 using I2C command protocol. |
|
|
|
| |
|
 |
| |
|
| |
|
 |
| |
| Section |
Item |
Specifications |
| Antenna Input |
Input Frequency |
57 ~ 860 MHz (VSB, NTSC) |
Antenna Impedance |
75 Ohms |
Connector Type |
F-type, Female |
Symbol Rate |
|
| Video |
Component output (YPbPr) |
1080i,720p,480p,or 480i |
| RGBHV output |
Optional |
| NTSC S-Video/Composit output |
Optional |
| CVBS output from tuner for NTSC TV support |
Optional |
| Audio |
Analog L/R output |
Vms:1.0Volt for 0dB stream input
|
| Digital audio output(SPDIF) |
PCM or Dolby Digital(Optional) |
Audio IF output from tuner for NTSC TV support
|
Optional |
| Miscellaneous |
One RF input |
ATSC(NTSC tuning optional) |
| I2c slave interface to control ATSC module |
100kHz mode |
| RS232C interface for firmware upgrade |
Baud rate:115,200bps |
| +5V and +3.3V Power Inputs |
|
Connectors |
10pin for Power input |
| 28pin for A/V output and control signal interface |
|
|
