 |
Video Input |
| |
- Digital video input with 10-bit precision
- Input resolution : Interlaced scan 720x480i or 720x576i
Progressive up to 1280x1024p
- Video format : RGB/YCbCr 4:4:4 or YCbCr 4:2:2
Y/C type : Multiplexed(BT.656) or separated(BT.601)
Sync type : Separated or embedded(BT.656/BT.1120)
Digital input : 12/24-bit(4:4:4) or 8/10/16/20-bit(4:2:2)
|
|
|
Video Output |
| |
- Digital(MDIN-221 Only) and analog video output
- HDMI(ver.1.2) output(MDIN-241 Only)
- Output resolution : Interlaced up to 1920x1080i
Progressive up to 1920x1080p
- Digital output video format(MDIN-221 Only) :
12/24-bit(4:4:4) or 8/10/16/20-bit(4:2:2)
RGB/YCbCr 4:4:4 or YCbCr 4:2:2
Y/C type : Multiplexed(BT.656) or Separated(BT.601)
Sync type : Separated or embedded(BT.656/BT.1120)
- Analog video output with triple 10-bit DACs(Separated sync or Sync on G/Y) |
|
|
Deinterlacing |
| |
- Motion adaptive 3-D deinterlacing on a per-pixel basis
- Advanced multi-directional edge preserving
- Fast motion, slow motion and still image detection
- Motion boundary preserving
- High frequency area detection and adaptation
- Film mode support for 3:2 and 2:2 pull-down
- Bad-edit/subtitle detection and adaptation
|
|
|
Noise Reduction and Cross Color Suppression |
| |
- High quality 3-D noise reduction with motion detection
- Cross-color suppression for 2-D comb-filtered input |
|
|
Format Conversion |
| |
- Independent horizontal and verical scaling with anti-aliasing interpolation filter
- Format conversion from one format to another format with an arbitrary scaling ratio
- Scaling ratio : x1/15 ~ unlimited
- Programmable size & position zoom in/out |
|
|
Dispaly Functions |
| |
- Brightness, contrast, hue and saturation control
- Programmable display size and position |
|
|
Frame Rate Conversion |
| |
- Frame rate conversion from 3-250Hz to 3-250Hz
- Conversion ratio : x1/31 ~x31
- Utilizes embedded memory as frame buffer |
|
|
Signal Enhancement |
| |
- High order programmable horizontal peaking filter
- Filter for color component enhancement
- LTI and CTI for edge enhancement
- Programmable gain control & coring
- Adaptive contrast enhancemnet |
|
|
OSD |
| |
- Bitmap and character mode OSD
- One layer with 4 sprites
- 16-color with 32-level alpha blending
- Up to 32x63 font size and 1-bpp or 4-bpp font color
- 32-row x 16-col or 16-row x 32-col character map
- Bitmap copy and run-length decoding |
|
|
HDMI/DVI Trnasmitter(MDIN-241 Only) |
| |
- Industrial standard compliant HDMI 1.2, DVI 1.0, EIA/CEA-861D & HDCP 1.1
- I2C Master interface for DDC connection
- Integrated HDCP cipher engine and Pre-programmed HDCP keys
- Hot plug detection for monitor/TV interface
- Four I2S audio inputs : 2-ch 192kHz or 8-ch 96kHz
- Industrial audio standard support : IEC60958 for PCM and IEC61937 compressed audio(Dolby Digital, DTS and etc.)
- Adjustable audio delay for A/V synchronization(up to 680ms at 48kHz)
- Built in Consumer Electronics Control(CEC) support |
|
|
Frame Buffer Memory |
| |
- Embedded frame buffer memory |
|
|
Communication Interface |
| |
- 2-wire serial interface-I2C |
|
|
Miscellaneous |
| |
- Auto detection of input video/sync
- Support composite sync and non-standard sync signal
- Lock-to-input sync mode or free-run mode
- Programmable output sync singal generation
- Built-in test pattern generation logic |
|
|
Electrical and Mechanical Characteristics |
| |
- 1.2V, 1.8V & 3.3V supply voltage
- 3.3V I/O signal interface
- Low power consumption : Max 0.5w(for HDMI output)
Max 0.7w(for analog output)
- 144-pin FBGA package(12mm x 12mm/0.8mm pitch) |
